Glass particles degree of non-compliance Reason 1: lack of hair strength steel in the bottom of the pressure range, does not meet the requirements. The solution: increase the air pressure quench place special glass to reduce the height of the glass wind gate two reasons: the glass furnace temperature is too low. Glass is not yet completely burned through. The Solution: Make sure that no deformation special glass market, in the case of glass, an appropriate increase oven temperature or longer heating time of glass special glass, Reason 3: The actual thickness of the glass is less than a predetermined. Workaround: Use the standard thickness of glass and steel. Reason 4: The ambient air temperature is too high. Air density is too small. Solution: the production of glass and nighttime low temperatures. Intelligent dimming glass related technical information intelligent dimming glass relevant technical information an intelligent dimming glass in case of power failure condition is white, colorless and transparent when power is significant. 2, intelligent dimming glass transmittance shall not be less than 70 percent of export specialty glass opacity rate should not exceed 1%. 3, response time intelligent dimming glass should not be higher than 70ms. 4, intelligent dimming glass conversion speed OFF (when impervious) → ON (transparent) approximately 1/1000 seconds ON (transparent) → OFF (when impervious) for about five seconds 1/1000, intelligent dimming glass perspective should not less than 140 °. Safety requirements: 1, resistance between intelligent dimming glass ground contact with the ground components need not exceed 0.1Ω. 2, intelligent dimming glass earth leakage current shall not exceed 0.25mA. 3, intelligent dimming glass should be able to withstand 120V AC, which lasted 60S no breakdown. 4, intelligent dimming glass life of not less than 50000h. 6, intelligent dimming glass at -10 ℃ ~ + 60 ℃ under the environment should be able to work properly. 7, intelligent dimming glass working voltage of 75V frequency of 50Hz, voltage fluctuation is not higher than the case of 10V should be able to work properly. Special glass factory | special glass | glass provided by the Thai Glass Co., Ltd. Nanjing, China and Thailand. Glass Technology Co., Ltd. Nanjing, China and Thailand (www.njztglass.com) strong, credible, in Nanjing, Jiangsu architectural glass industry has accumulated a large number of loyal customers. The company better work attitude and constantly improve the innovative ideas will lead Thailand into the brilliant glass and you work for a better future!